Browse all practice questions for the MTA Tower Operator Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

MTA Tower Operator Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which signal automatically displays the same aspect and helps define limits of interlocking?
  • What action should be taken when the lever is positioned completely to the right for N/B traffic?
  • What should the holding lights indicate during non-commission hours?
  • What does a signal at a fixed location indicate concerning train movement?
  • What is the role of Grade Time Signals in train operation?
  • In the event of a track circuit failure, what operational status may the Switch indicate?
  • What is the definition of Absolute Block in train operation?
  • What is the military time for 8:45 PM?
  • When are trains prohibited from being delayed for connections during non-commission hours?
  • How far apart are the signal survey plates A4-327 and A4-338?
  • What type of signals are defined as being controlled by time factors?
  • What should a tower operator do if they encounter a stalled train?
  • What is prohibited regarding outdoor messages between 2100 and 0600?
  • What is the military time when a train departs at 7:00 AM?
  • What does Rule 9.05 (n) state about diverting a train from its regular route?
  • What are Dwarf Signals primarily used for?
  • Upon leaving South Ferry Station at 1012, what time will you arrive back at Dyckman if the journey takes 51 minutes?
  • What does an illuminated "S" signal signify?
  • What does a RED OVER RED signal instruct an operator to do?
  • Which signal aspect typically signifies to a train to STOP?
  • What does the aspect of a Time Controlled Signal typically include?
  • To establish a route, the Tower Operator should?
  • What is one of the duties of a tower operator regarding flagging trains?
  • What military time corresponds to 10:00 PM?
  • What should a operator do upon seeing a YELLOW OVER YELLOW signal?
  • What action should an operator take upon a YELLOW OVER RED (IRT) signal?
  • What is the purpose of Marker Signals in train operations?
  • What feature helps indicate the setup or status of the signal in a tower operation?
  • When is it essential to operate the manual release lever?
  • What information is provided by a Timetable?
  • What equipment consists of a group of manually operated levers used for switch control?
  • What general principle applies when operating an interlocking machine?
  • What is a Relay Track?
  • What is the implication of a YELLOW signal with respect to the next steps?
  • Which aspect is important for the physical alignment of components in tower operations?
  • Which mechanism provides feedback on the current status of the signal light?
  • During commission hours, when should holding lights be displayed?
  • What must employees do to identify the tower correctly?
  • How are Revenue Trains defined?
  • What does a Dwarf Signal displaying red over red indicate?
  • How long does a train need to be late upon arrival at a terminal for it to be counted as late statistically?
  • What does a yellow over green signal represent?
  • Which of the following is an indication of a malfunction in the Switch according to Tower Operator protocols?
  • If confronted with a RED/YELLOW signal, what should the operator do?
  • What is the correct military time for going to bed at a quarter to eleven at night?
  • Which of the following actions is essential for tower operators when managing train movements?
  • Who do tower operators collaborate with to ensure smooth operations?
  • In a tower operation system, what is the purpose of the model board?
  • What is the primary characteristic of a Relay Track?
  • What function is performed by a lever locking feature in a tower operation?
  • Which signal specification ensures a train's safe approach to a Home Signal?
  • What does the radio code 12-4 indicate?
  • On a push button machine, where are the call-on buttons located?
  • On a Push-button Control Panel, an Auxiliary Switch operating key is used to move and lock a switch when?
  • In case of a flood or serious water condition, what action should be taken?
  • What lever position indicates S/B (Southbound) traffic?
  • A device used in connection with a Signal Lever to delay the placing of the lever into its Normal position is called?
  • What does the radio code 12-10 signify?
  • What error should a Tower Operator look for when operating a Switch?
  • In the event of a fire or smoke condition, what is the first priority?
  • How many "W" trains operate in an hour between 0806 hrs and 0854 hrs?
  • While under a YARD INDICATION signal, what is the operator allowed to do?
  • What should a tower operator not do without proper authorization?
  • What should a tower operator do when they identify unusual conditions?
  • Which type of signal is described as a "black X" and is an absolute stop indication?
  • How many days do you have to report an address change or telephone number to the authorities?
  • What is the typical abbreviation for a train that is scheduled to stop for an extended period before proceeding?
  • What is the military time for 10:03 PM?
  • What should be done when there is a disruption in service during the specified time frame?
  • What should be done if a train is running ahead of schedule?
  • When can outdoor announcements in Brighton Beach be made?
  • In the context of the machine operation, what does a master lever represent?
  • What should the tower operator do in case of a customer under the train?
  • When the switch lever on a GRS machine is positioned all the way out, what direction is it set to?
  • What color is associated with the master lever on a switch?
  • What does the letter "L" indicate in train operations?
  • What does the bottom of a standard home signal indicate?
  • Which station is represented by the GAP sheet?
  • How long is the scheduled run if a train starts at 00:50 hrs and arrives at 02:47 hrs?
  • What does an illuminated indication light in a track circuit signify?
  • The traffic lever is identified by which color?
  • What action is crucial during a derailment situation?
  • What is the first action to take when ascertaining the exact location of a train?
  • When a train unexpectedly stops while passing over a switch, the Tower Operator should FIRST?
  • Which of the following is NOT an electrical failure type indicated?
  • What must be done when Signal Maintainers are working on a switch?
  • When cancelling a route on a push button machine, which button should the Tower Operator pull?
  • What action should a train crew take if a Dwarf Signal is illuminated red?
  • Which of the following is a feature of a lever that indicates N/B traffic is established?
  • How do you write 6:45 AM in military time?
  • What is prohibited for tower operators without proper authority?
  • What is the defined time for morning commission hours?
  • What is the common distance between signal survey plates along a railway?
  • What is the time frame for evening commission hours?
  • What should not be displayed for other reasons during commission hours?
  • What reflects the condition of the switch in operational signaling systems?
  • One important reason for implementing "GAPPING" service is to achieve what?
  • What must a train do when following a Signal Yellow over Green?
  • What is a necessary action if an armed passenger is reported on the train?
  • What type of failure is indicated by a non-lit light on an electrical failure type?
  • What is essential for checking the time release mechanism in a signaling operation?
  • If a train is routed from express to local track, will additional running time be added?
  • What plays a role in changing the state of signals in tower systems?
  • A Tower Operator operating an Interlocking Machine with a Traffic Control feature can normally change the direction of traffic ONLY when?
  • What is an indicator that confirms the operating state of signals in a tower?
  • What is a primary function of a Gap Station?
  • What does a GREEN OVER GREEN (IRT) signal signify?
  • Which feature represents a release function in signaling systems?
  • What does the signal represented by GREEN OVER YELLOW indicate?
  • What does an illuminated "S" at a Subdivision "A" signal indicate?
  • The Emergency Screw Release feature is primarily used to overcome?
  • In the case of an emergency, who should be immediately informed?
  • When is a tower operator required to notify the RCC?
  • What does the signal of one long, one short, one long, and one short indicate?
  • What is the primary function of a conventional machine in the IND division?
  • What is the military time for 6:34 PM?
  • Which feature in tower operations allows for ensuring that signals can be sent and received safely?
  • In rail operations, what is the primary function of a master lever?
  • When presented with a RED OVER RED OVER YELLOW signal, what action should be taken?
  • A miniature lever field control panel does NOT have?
  • What does "proceed with restricted speed" typically mean in rail operations?
  • What is the primary role of a switch detector light in tower operations?
  • If a train arrives at Chambers Street at 0750 hours, at what time is it scheduled to leave?
  • What must a tower operator do when expediting service?
  • What type of signal controls the movement of trains when approaching a Home Signal?
  • Which color represents a Signal Lever?
  • What action should be taken if the desired route cannot be established on a push button machine?
  • What is a critical safety measure for a Tower Operator before engaging in Hand Cranking operations?
  • What is the preferred action regarding Stop Arms in the direction of traffic when dealing with Hand Cranking Switches?
  • What action should be taken regarding signal malfunctions?
  • What is a crucial component for verifying that the lever is functioning properly in a tower operation?
  • What is the headway between the 0838N and the 0908N trains?
  • A flashing white light in the Switch segment of the Push Button Control Panel indicates?
  • What type of track circuit is indicated when the light is not illuminated?
  • What is considered an act of vandalism in this context?
  • What is the consequence of not adhering to the schedule of a train arrival at Chambers Street?
  • In case of an emergency, how many horn signals are typically used to request police assistance?
  • For statistical purposes, what timing is relevant when tracking train arrivals?
  • What should an operator be prepared to do when seeing a RED/RED/YELLOW signal?
  • Which component is associated with the indication of the direction of traffic?
  • What is required of the operator when a signal exhibits YELLOW OVER YELLOW OVER YELLOW?
  • What characterizes an Automatic Signal in train operations?
  • What is the correct military time for lunch at 11:15 AM?
  • A green over green signal indicates what for the train?
  • From whom may tower operators take instructions?
  • How is a Home Signal typically presented?
  • If a train's scheduled arrival is at 02:47 hrs, what time must it leave if the run is 1 hour, 57 minutes?
  • For which scenario is a CALL-ON signal applicable?
  • When is the earliest a train listed as "W" can depart based on the provided schedule?
  • A dark signal with no aspect indicates what action for a train?
  • How many types of home signals are recognized in Tower Operations?
  • A "Call-On" should NOT be given for?
  • What does the term "ghost circuit" refer to in this operational context?
  • What is the maximum allowable speed when passing over a switch?
  • What is the total running time from 242 Station Van Pk to South Ferry Station between 0028 hrs and 0118 hrs?
  • What must tower operators observe while operating?
  • Which type of indication shows track switch and controllable signal locations?
  • If train 0753 W leaves STL on time, what is the scheduled arrival time at Pacific 86th?
  • What does three short horn signals indicate?
  • What is a primary responsibility of tower operators regarding train schedules?
  • What does one long and one short horn signal indicate?
  • When is it appropriate to use a spare switch in operations?
  • If you wake up at half past six in the morning, how should you write this in military time?
  • To establish a route on a push button machine, the Tower Operator should do which of the following?
  • What does a STOP signal indicate in train operations?
  • On a route that is NOT fleeted, each signal in the route will?
  • What does a Yellow over Green signal indicate in train operations?
  • What does the term Rerouting refer to in train operations?
  • What action must a tower operator take when there is an obstruction on the track?
  • When conducting a signal survey, what is a critical factor to note regarding spacing?
  • What indicates an Approach Signal's identity in an interlocking system?
  • What is the protocol for holding back a preceding train service?
  • What is the correct sequence for moving a switch?
  • Which action is prohibited until permission is granted from RCC?
  • Which document describes how to manipulate interlocking machines?
  • Which condition would trigger a standard emergency protocol alert?
  • What does an illuminated light signify in a track circuit?
  • What does a headway of 10 minutes indicate in train scheduling?
  • Who is responsible for making train service delay announcements when D.A. are not available?
  • The 858N train service operates between which two terminals?
  • What should a Tower Operator do if they detect an error in an order from the Train Dispatcher?
  • Which signal indicates that a train must stop?
  • How should a train approach a Subdivision "A" signal displaying Yellow over Red with an illuminated "S"?
  • What is necessary to ensure signals are clear within the tower operation area?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy